Monza
Metal Roofing sheet Monza
Why is it worth choosing?
Expressive ribbing 20mm every 350mm, making the roof look like a roof tile. There is no narrowing of the vertical wall in the place of the over press, the sheet has 0.5 mm in place. As a result, the paint layer
is not weakened and the strength is still high.
Our roofing tile has a double water-retaining groove located in the place of folding. All to exclude the smallest droplets of water. Specialist tip, which facilitates assembly (width 25 mm).
Perfect folding of sheets.
High quality sheet from Arcelor Mittal Steelworks (Poland)
Technical parameters
Material: | Steel DX + Z galvanized on both sides (Z225) + protective coatings + decorative varnish. |
Number of colours: | RAL 3005, 3011, 8017,7024,8019, 9005, 9006. Available in 10 different shades in gloss and RAL palette (below is a palette of RAL shades) |
Overall width [mm]: | 1200 mm |
Cover width [mm]: | 1120 mm |
Maximum sheet length [mm]: | 7800 mm |
Length of the wave module [mm]: | 350 mm |
Sheet thickness [mm]: | 0,5 – 0,55 mm |
Total height [mm]: | 27 mm |
Emboss height [mm]: | 20 mm |
The minimum slope of the roof slope: | 14° |
Weight 1 m [kg]: | 5 kg/m2 |
Warranty: |
up to 10 years for gloss coatings, up to 15 years for matt coatings * |
Application: |
To cover roofs: houses, offices, gazebos, etc. |
PRODUCER: | „GLINMET” |
Deadlines for implementation: | from 1 to 7 working days |
* The warranty over 2 years applies to the warranty conditions and the proper maintenance of the roofing material.
MATTE RAL 8017 coating

HPS 200 RAL 9005 coating
Possible colours
Colours in HPS 200 coatings - thickness 0,65mm
Steel sheet, galvanized on both sides 0,48mm plus 200µm coating.
Coating colours Coating Matt - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 35µm coating.
Colours in coatings Gloss - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 25µm coating.