Galla Mat
Technical parameters of Galla Mat
Material: | Steel DX + Z galvanized on both sides (Z225) + protective coatings + decorative varnish. |
Number of colours: | RAL 3009, 6020, 7024, 8004, 8017, 8019, 9005. Available in various shades in RAL palette (below is a palette of RAL shades). |
Overall width [mm]: | 1200 mm |
Cover width [mm]: | 1120 mm |
Sheet length [mm]: | 760 mm |
Length of the wave module [mm]: | 350 mm |
Sheet thickness [mm]: |
0.5 mm (Arcelor Mittal matt coating); 0.65 mm (HPS 200 Corus coating). |
Total height [mm]: | 55 mm |
Emboss height [mm]: | 30 mm |
The minimum slope of the roof slope: | 14° |
Sheet weight: | about 5 kg / piece |
Warranty: |
up to 15 years for matt coatings, up to 30 years for HPS 200 coatings |
Application: |
To cover roofs: houses, offices, gazebos, etc. |
PRODUCER: | „GLINMET” |
Deadlines for implementation: | from 1 to 7 working days |
* The warranty over 2 years applies to the warranty conditions and the proper maintenance of the roofing material.
MATTE RAL 7024 coating
MATTE RAL 8004 coating
Possible colours
Colours in HPS 200 coatings - thickness 0,65mm
Steel sheet, galvanized on both sides 0,48mm plus 200µm coating.
Coating colours Coating Matt - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 35µm coating.
Colours in coatings Gloss - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 25µm coating.