Galla HPS 200
Technical parameters of Galla HPS 200
|Material:||Steel DX + Z galvanized on both sides (Z225) + protective coatings + decorative varnish.|
|Number of colours:||RAL: 3009, 6020, 7024, 8004, 8017, 8019, 9005, Available in various shades in RAL palette (below is a palette of RAL shades).|
|Overall width [mm]:||1200 mm|
|Cover width [mm]:||1120 mm|
|Sheet length [mm]:||7800 mm|
|The length of the wave module [mm]:||350 mm|
|Sheet thickness [mm]:||0.5 mm (Arcelor Mittal matt coating); 0.65 mm (HPS 200 Corus coating).|
|Overall height [mm]:||55 mm|
|Emboss height [mm]:||30 mm|
|The minimum slope of the roof slope:||14°|
|Sheet weight:||about 5 kg / piece|
|Warranty:||up to 15 years for matt coatings, up to 30 years for HPS 200 coatings.|
|Usage:||To cover roofs: houses, barns, offices, gazebos, etc.|
|Deadlines for implementation:||from 1 to 7 working days|
* The warranty over 2 years applies to the warranty conditions and the proper maintenance of the roofing material.
HPS 200 RAL 9005 coating
HPS 200 RAL 7016 coating
Colours in HPS 200 coatings - thickness 0,65mm
Steel sheet, galvanized on both sides 0,48mm plus 200µm coating.
Coating colours Coating Matt - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 35µm coating.
Colours in coatings Gloss - thickness 0,5mm
Steel sheet, galvanized on both sides 0,48mm plus 25µm coating.